MG3 Machine Gun

Rheinmetall MG 3
From Wikipedia, the free encyclopedia
"Karar" redirects here. For the Iranian unmanned aerial combat drone, see Karrar (UCAV).
For the car, see MG 3.
MG 3

MG 3 on display
Type General-purpose machine gun
Place of origin West Germany
Service history
In service 1960–present
Used by See Users
Production history
Designed 1959
Manufacturer Rheinmetall
License-built by: Beretta, MKEK, Ellinika Amyntika Systimata, Defense Industries Organization, Military Industry Corporation, Pakistan Ordnance Factories, General Dynamics Santa Bárbara Sistemas
Produced 1960–present
Variants See Variants
Specifications
Weight 10.5 kg (23.15 lb)
27.5 kg (61 lb) (mounted on tripod)
Length 1,225 mm (48.2 in)
1,097 mm (43.2 in) (without stock)
Barrel length 565 mm (22.2 in)
Cartridge 7.62×51mm NATO
Action Recoil-operated, roller locked
Rate of fire 1000–1300 rpm[1]
Muzzle velocity 820 m/s (2,690 ft/s)
Effective firing range 200–1,200 m sight adjustments
Maximum firing range 800 m (bipod)
1,000 m (tripod mounted)
3,000 m (gun carriage)
Feed system 50-Round non-disintegrating DM1 belt (can be combined in a drum); 100-Round disintegrating DM6/M13 belt
Sights Open tangent iron sights
The MG 3 is a German general-purpose machine gun chambered for the 7.62×51mm NATO cartridge. The weapon's design is derived from the World War II era MG 42 universal machine gun that fired the 7.92×57mm Mauser round.[2]

The MG 3 was standardized in the late 1950s and adopted into service with the newly formed Bundeswehr, where it continues to serve to this day as a squad support weapon and a vehicle-mounted machine gun. The weapon and its derivatives have also been acquired by the armed forces of over 30 countries. Production rights to the machine gun were purchased by Italy (MG 42/59), Spain, Pakistan (MG 1A3), Greece, Iran, Sudan and Turkey.[3]

Contents  [hide]
1 History
2 Design details
2.1 Operating mechanism
2.2 Features
2.3 Barrel
2.4 Tripod
3 Variants
3.1 Multiple barrel variants
4 Deployment
5 Users
6 See also
7 Notes
8 References
9 External links
History[edit]

Soldiers of the West German Bundeswehr on exercise in 1960. Pictured is the predecessor to the MG 3 — the MG 1A3 variant. The soldier on the right is carrying a G3 battle rifle. In the rear stands a SPz 11-2.
Production of the first postwar variant of the MG 42 chambered in a standard NATO caliber (designated the MG 1) was launched in 1958 at the Rheinmetall arms factory as requested by the Bundeswehr. Shortly thereafter, the machine gun was modified, receiving a chrome-lined barrel and sights properly calibrated for the new round; this model would be named the MG 1A1 (known also as the MG 42/58).

A further development of the MG 1A1 was the MG 1A2 (MG 42/59), which had a heavier bolt (950 g, compared to 550 g), a new friction ring buffer and was adapted to use both the standard German continuous DM1 ammunition belt and the American M13 disintegrating belt. Further improvements to the weapon's muzzle device, bipod and bolt resulted in the MG 1A3.

Simultaneously, wartime 7.92×57 (now officially known as 8×57 IS) MG 42 machine guns that remained in service were converted to chamber the standard 7.62×51 mm NATO round and designated MG 2.

In 1968, the MG 3 was introduced and entered production. Compared to the MG1A3, the MG 3 features an improved feeding mechanism with a belt retaining pawl to hold the belt up to the gun when the top cover plate is lifted, an added anti-aircraft sight and a new ammunition box. MG 3s were produced for Germany and for export customers by Rheinmetall until 1979. Some additional production of the MG 3 in Germany was carried out by Heckler & Koch.[4] The MG 3 and its variants all share a high level of parts interchangeability with the original MG 42.

Design details[edit]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2015)
Operating mechanism[edit]

MG 3 of the German Army.

Parts of a German MG 3
The MG 3 is an automatic, air-cooled, belt-fed short recoil-operated firearm. It features a roller locked bolt mechanism that consists of the bolt head, a pair of rollers, the striker sleeve, bolt body and return spring. The bolt is locked securely by a wedge-shaped striker sleeve, which forces two cylindrical rollers contained in the bolt head outward, and into corresponding recesses in the extension of the breech of the barrel. On firing, both the barrel and barrel extension recoil to the rear. The resulting impact (much like a Newton's cradle) moves the carrier to the rear withdrawing the wedge and both rollers as they are cammed inward and out of their sockets by fixed cams, unlocking the bolt head. The bolt carrier and bolt then continue to the rear together guided by fixed guides while the barrel and barrel extension return to battery. Upon return of the bolt forward, the impact of the rollers against the camming surfaces on the breech carry the rollers from their seats, and, together with the surfaces on the striker sleeve, force the rollers outward, locking the bolt head into the barrel extension and ensuring a complete lock. The bolt also houses a spring-loaded casing extractor and ejector. Ejection is carried out when the ejector strikes the buffer head, sending a push forward through the ejector bar, which hits the ejector pin. This pin pushes the top of the base of the cartridge, which is still held by the extractor at the base, causing the empty casing to rotate and eject downward through the ejection chute.

Features[edit]
The machine gun has an automatic-only trigger mechanism and a cross-bolt safety in the form of a button that is operated by the shooting hand (in its "safe" position the bolt release is disabled). The weapon fires from an open bolt. The cyclic rate can be altered by installing different bolts and recoil springs.

The MG 3 feeds from the left side through a feed block using metal, 50-round continuous-link DM1 ammunition belts (which can be combined by cartridge) or disintegrating-link M13 or DM6 belts. In the light machine gun role, the MG 3 is deployed with a 100-round (or 120-round in case of disintegrating belts) belt fitted inside a synthetic ammunition drum developed by Heckler & Koch that is latched on to the left side of the receiver. The rear wall of the drum is transparent and serves as a visual indicator for the amount of ammunition available. The feed system operates through a feed arm that is housed in the feed cover. Two feed pawls are linked to the front end of the arm by an intermediate link and move in opposite directions, moving the belt in two stages as the bolt moves back and forward during firing.

Barrel[edit]

The MG 3 seen here in the stationary, heavy machine gun role, mounted on a stabilized Feldlafette tripod and fitted with an optical Zielfernrohr 4 x 24 periscope sight.
The MG 3 has a quick-change, chrome-lined barrel with four right-hand grooves and a rifling twist rate of 1 in 305 mm (1:12 in). Alternatively, MG 3 barrels can also have polygonal rifling. The barrel is integrated with the barrel breech. During sustained firing, there is a need for the barrel to be changed and this is how they are swapped: The gun is cocked and the barrel catch on the right of the barrel shroud is swung forward. Then, the breech end of the hot barrel swings out and can be removed by elevating or twisting the gun. A fresh barrel would be inserted through the barrel catch and the muzzle bearing. When the catch is rotated back, the barrel is locked and the machine gun can resume firing. Both the receiver housing and ventilated barrel casing are made from pressed sheet steel. A muzzle device is mounted at the end of the barrel and it acts as a flash suppressor, muzzle brake and recoil booster.

The machine gun is equipped with a synthetic polymer stock, a folding bipod and open-type iron sights (sliding rear U-notch on a ramp with range settings from 200 to 1,200 m). A flip-up anti-aircraft sight is also provided.

Tripod[edit]
In a stationary, heavy machine gun role the MG 3 is mounted on a buffered Feldlafette, "field tripod", and outfitted with Zielfernrohr 4 x 24 periscope-style telescopic that like the MG 3 is mounted on the Feldlafette.

Variants[edit]

German naval security troops deployed in a training scenario with an MG 3 (1990s).

Austrian Army soldiers with MG 3 and Steyr AUG during a maneuver
MG 1: Rheinmetall variant of the MG 42, most notably rechambered to fire 7.62×51 mm NATO.
MG 1A1 (MG 42/58): As MG 1, but with sights properly calibrated for the new round. Sights refitted to existing MG 1s.
MG 1A2 (MG 42/59): MG 1A1 variant; product improved with longer ejection port, heavy bolt and friction ring buffer.
MG 1A3: MG 1A2 variant; product improvement of all major components.
MG 1A4: MG 1 variant; for fixed mount armor use.
MG 1A5: MG 1A3 variant; MG1A3s converted to MG1A4 standard.
MG 2: Designation for all wartime MG 42s rechambered to 7.62×51 mm NATO.
MG 3: MG 1A3 variant; product improved with AA rear sight.
MG 3E: MG 3 variant; reduced weight model (roughly 1.3 kg lighter), entered into late 1970s NATO small arms trials.
MG 3A1: MG 3 variant; for fixed mount armor use.
MG 3KWS: MG 3 variant; developed by Rheinmetall and Tactics Group as a stand in until the HK121 replaces it.[5]
Ksp m/94: Swedish variant chambered with the 7,62x51 mm NATO round. Mainly used as secondary armament in Stridsvagn 122.
Multiple barrel variants[edit]
A mounted variant with three rotating barrels (to reduce barrel erosion and overheating) is under development as the Rheinmetall RMG 7.62 as a vehicle weapon.

The MG14z is a double barrel variant of the MG 3 machine gun. The MG14z enhances the firepower of military units that still issue the MG 3 or other MG 42 derivatives. It has been developed by the Tactics Group GmbH company "a low-cost alternative to Miniguns".[6][7]

Deployment[edit]
The MG 3 is still used as the standard secondary weapon of most modern German armoured fighting vehicle designs (e.g. Leopard 2, PzH 2000, Marder), as a primary weapon on light/non-armored vehicles (e.g. LKW 2to, MAN gl-trucks, ATF Dingo) and as an infantry weapon on light bipods as well as different tripods. However, the German Armed Forces will phase out the MG 3 in 2012; they introduced the HK121 in 2011.[citation needed]

Users[edit]

German soldier and U.S. Marine training with the MG 3.

Italy employs the MG 42/59 version primarily on vehicles and rotary-wing aircraft. Seen here mounted on the B1 Centauro wheeled armoured vehicle.

Spanish Marine with the MG 3. Spanish guns are manufactured by General Dynamics Santa Bárbara Sistemas.

A pintle-mounted MG 3A1 on a Norwegian Leopard 2A4NO main battle tank.
 Australia: The MG 3 was used between 1976 and 2007 as an anti-aircraft weapon on the Australian Army's Leopard AS1 MBT.[8]
 Austria: Uses the MG 74 which is a MG 42/59 variant licensed from Beretta and manufactured by Steyr Mannlicher. The MG 74's cyclic rate of fire is 850 rounds per minute.[9]
 Azerbaijan: The Military of Azerbaijan acquired a small quantity of MKEK MG 3s from Turkey.
 Bangladesh: Used by the Border Guards Bangladesh [10]
 Brazil: Uses the MG 3 and the MG 3 acquired from other sources will continue to use the FN MAG. A1 with the Leopard 1A5 BR[11]
 Canada: Only used on 20 Leopard 2A6M CAN tanks acquired from Germany.[12] Leopard 2s acquired from other sources will continue to use the FN MAG.
 Cape Verde[13]
 Chile[14]
 Denmark: MG 42/59 designated M/62 in Danish service.[15]
 Estonia[16] Designated as MG 3. MG 1A3 version with the anti-aircraft sight.
 Finland: As the 7.62 KK MG 3. Used with the Leopard 2 tanks and NH90 helicopters.[17]
 Germany: Used by the Bundeswehr.[13] A replacement is planned from 2011 onwards.
 Ghana[18]
 Greece: License production by Hellenic Defense Systems or EAS (formerly Hellenic Arms Industry; Elliniki Biomihania Oplon - EBO).[1][14]
 Iceland: Used by the Icelandic Coast Guard.[19]
 Iran: License production by Defense Industries Organization as the MGA3.[14][20]
 Italy: License production of the MG 42/59 by Beretta with parts made by Whitehead Motofides and Luigi Franchi; while largely replaced in squad support weapon role by the Belgian FN Minimi, it still sees widespread mounted use on ground-based vehicles and helicopters.[14][21] Prior to the procurement of the Minimi, the Stabilimento Militare Armi Leggere (SMAL) at Terni has developed a kit to adapt the Italian Army's existing MG 42/59 machine guns to accommodate 5.56×45mm NATO ammunition. The kit comprises a new barrel, bolt head, feed opening and cover, recoil-enhancing element and a lighter bolt. The weight of the modified 5.56 mm MG 42/59 machine gun remains unchanged from the original version.
 Kurdistan: Peshmerga 40 supplied by Germany [22]
 Latvia: Latvian Land Forces
 Lithuania: Lithuanian Armed Forces.[23]
 Mexico: License produced by SEDENA in Mexico.[24]
 Myanmar[13]
 Norway[13]
 Pakistan: Used by the Pakistan Army.[25] Manufactured under license by Pakistan Ordnance Factories in Wah Cantt.[26]
 Poland: On Leopard 2 tanks and support vehicles. Probably to replace by UKM-2000 and WKM-B.[27]
 Portugal[14]
 Sao Tome and Principe[13]
 Saudi Arabia[13]
 Spain: Made under license.[14]
 Sudan: Made by Military Industry Corporation as the Karar.[28]
 Sweden: As the KSP m/94. Used with the Leopard 2 tanks.[29]
 Togo[13]
 Turkey: Made by MKEK in Kırıkkale under license since 1974[30] for the Turkish Armed Forces and Turkish Gendarmerie.[31]